The Hobart AM14 parts manual is a comprehensive guide to maintaining and repairing your dishwasher. It includes detailed diagrams, replacement part numbers, and maintenance tips to ensure optimal performance and longevity.
Overview of the Hobart AM14 Dishwasher
The Hobart AM14 is a high-performance commercial dishwasher designed for durability and efficiency. It features a stainless steel upper wash and rinse assembly, providing superior washability and interchangeability with the lower wash arm. The dishwasher is built to handle heavy-duty cleaning in busy environments, ensuring clean and sanitized dishes consistently. Its exclusive design includes a float kit and magnetic holders for reliable operation. The AM14 requires specific water temperature and chloride levels to function optimally, with chlorides not exceeding 50 parts per million. Proper installation, including gas line connections using LOCTITE 565, is essential for safety and performance. Regular maintenance, such as checking and replacing worn parts, is crucial to extend the lifespan of the dishwasher. With its robust construction and advanced features, the Hobart AM14 is a reliable choice for commercial kitchens seeking a dependable warewashing solution.
Key Components and Replacement Parts
The Hobart AM14 features key components like the upper wash and rinse assembly, lower wash arm, and float kit. These parts ensure efficient cleaning and durability, with interchangeable designs for convenience.
Upper Wash and Rinse Assembly
The upper wash and rinse assembly in the Hobart AM14 dishwasher is designed for optimal cleaning efficiency. It features a stainless steel wash arm, exclusive to Hobart, which provides improved durability and washability. This assembly is interchangeable with the lower wash arm, offering flexibility and convenience for maintenance and replacement. The design ensures thorough water distribution, enhancing the cleaning performance of the dishwasher. Regular inspection and maintenance of this assembly are crucial to prevent clogs and ensure consistent results. Replacement parts, such as O-rings and wash feed tubes, are readily available to keep the assembly functioning at its best. By following the guidelines in the manual, users can extend the lifespan of their dishwasher and maintain its peak performance.
Lower Wash Arm and Interchangeability
The lower wash arm in the Hobart AM14 dishwasher is a critical component for ensuring dishes are thoroughly cleaned. Designed for durability, it is constructed from high-quality materials to withstand the demands of frequent use. One of its key features is its interchangeability with the upper wash arm, allowing for flexibility in maintenance and replacement. This design simplifies the process of keeping both wash arms in optimal condition, as they can be swapped to balance wear and tear. Regular inspection of the lower wash arm is essential to identify and address any blockages or damage promptly. Cleaning the arm periodically ensures proper water flow and spray coverage. Replacement parts, such as the lower wash arm and associated components, are readily available from authorized Hobart dealers, ensuring your dishwasher continues to perform efficiently. Proper maintenance of this component is vital for maintaining the overall performance and longevity of the Hobart AM14 dishwasher.
Float Kit and Magnetic Holders
The float kit and magnetic holders in the Hobart AM14 dishwasher are essential for maintaining proper water levels and ensuring efficient operation. The float kit works by monitoring the water level within the dishwasher, preventing overflow and ensuring accurate filling. Magnetic holders are used to secure various components in place, providing stability and preventing movement during operation. Regular inspection of these parts is crucial to identify wear or misalignment, which can affect performance. Cleaning the float and holders periodically helps maintain their functionality. Replacement parts, such as the float kit (Hobart part 00-122674) and magnetic holders, are available from authorized dealers. Proper installation and alignment of these components are necessary to ensure the dishwasher operates smoothly. Regular maintenance of the float kit and magnetic holders contributes to the overall efficiency and longevity of the Hobart AM14 dishwasher, ensuring reliable performance in commercial settings.
Maintenance and Troubleshooting
Regular maintenance ensures optimal performance and longevity of the Hobart AM14 dishwasher. Troubleshooting common issues, such as improper water temperature or excessive chlorides, helps prevent malfunctions and maintains warranty compliance.
Regular Maintenance Instructions
Regular maintenance is crucial to ensure the Hobart AM14 dishwasher operates efficiently and extends its lifespan. Check and clean the upper and lower wash arms periodically to remove grease and food particles, ensuring proper water flow. Inspect the gaskets and seals for wear or damage and replace them if necessary. Verify that the incoming water temperature is between 110°F and 120°F, as lower temperatures may require cycle adjustments. Monitor chloride levels in the water supply, ensuring they do not exceed 50 parts per million to prevent corrosion. Additionally, inspect the float kit and magnetic holders for proper function, as these components are essential for cycle control. Refer to the Hobart AM14 parts manual for specific part numbers and replacement instructions. By following these maintenance steps, you can prevent common issues, maintain compliance with safety standards, and ensure your dishwasher performs at peak efficiency.
Troubleshooting Common Issues
Common issues with the Hobart AM14 dishwasher can often be resolved with quick troubleshooting. Poor washing performance may result from clogged wash arms or improper detergent usage. Check and clean the upper and lower wash arms regularly to ensure optimal water flow. Leaks around the door or pump area could indicate worn gaskets or seals, which should be replaced using genuine Hobart parts. Strange noises during operation may signal issues with the pump or bearings. If the dishwasher fails to start, verify that the power supply is stable and check for tripped circuit breakers. Additionally, ensure the water supply lines are fully open and free from kinks. High chloride levels in the water can damage components over time, so monitor and adjust water treatment as needed. Refer to the Hobart AM14 parts manual for detailed troubleshooting guides and specific part replacement instructions to address these issues effectively.
Installation and Safety Guidelines
Ensure proper installation by following Hobart’s guidelines for gas line connections, using approved sealants like LOCTITE 565. Avoid using Teflon tape on gas pipes to prevent leaks. Keep flammable materials away from the appliance.
Gas Line Connections and Safety Precautions
Proper gas line connections are critical for safe and efficient operation of the Hobart AM14 dishwasher. Use LOCTITE 565, part number 546292, or a suitable flexible sealant for pipe connections. Avoid using Teflon tape, as it can lead to leaks. Ensure all connections are tight and leak-free before operation. Keep the area around the appliance free from flammable materials, vapors, or liquids to prevent fire hazards. Regularly inspect gas lines for signs of wear or damage. If unsure, consult a qualified technician. Proper ventilation in the installation area is essential to prevent gas buildup. Follow all local safety codes and Hobart’s guidelines to ensure compliance with safety standards. Annual inspections of gas connections are recommended to maintain safety and performance. Always disconnect the appliance from the gas supply during maintenance or repairs. Proper installation and adherence to safety precautions will help prevent accidents and ensure optimal functionality of the dishwasher.
Water Temperature and Chloride Requirements
For optimal performance, the Hobart AM14 dishwasher requires specific water temperature and chloride levels. Incoming water temperature must be between 110°F and 120°F for effective washing. If water temperature is below 110°F, the wash cycle may need to be extended from 40 to 60 seconds. Contact Hobart support to adjust cycle times. Chloride levels must not exceed 50 parts per million to prevent damage to components and ensure proper rinsing. Excessive chlorides can leave residue on dishes and harm the dishwasher’s internal systems. Use a water filter or treatment system if necessary to meet these requirements. Regularly test water quality to ensure compliance with these standards. Proper water conditions are essential for maintaining the warranty and ensuring the longevity of the appliance. Always refer to the Hobart AM14 parts manual for detailed specifications and maintenance recommendations. Adhering to these guidelines ensures efficient operation and prevents potential issues.
Warranty and Compliance Information
The Hobart AM14 dishwasher is backed by a comprehensive warranty covering parts and labor under specific terms. It complies with international safety standards, ensuring reliable and safe operation in commercial environments.
Warranty Terms and Conditions
The Hobart AM14 dishwasher is covered by a comprehensive warranty that protects against defects in materials and workmanship. The warranty period varies depending on the specific components, with most parts covered for a minimum of one year from the date of installation. Labor costs for repairs are typically included for the first year, provided the appliance is installed and maintained according to Hobart’s guidelines. To maintain warranty validity, users must adhere to all maintenance and usage instructions outlined in the manual. Failure to follow these guidelines may result in voiding the warranty. Covered components include the wash arms, float kit, and magnetic holders, among others. Exclusions apply to damages caused by improper installation, misuse, or neglect. For detailed warranty terms, refer to the official Hobart AM14 parts manual or contact Hobart’s customer support. Proper registration of the product is recommended to ensure full warranty benefits.
Compliance with Safety Standards
The Hobart AM14 dishwasher is designed to comply with rigorous safety standards to ensure safe and reliable operation. It meets or exceeds industry regulations set by recognized agencies, including UL (Underwriters Laboratories) and NSF International. The appliance is constructed with materials and components that adhere to strict safety protocols, minimizing risks associated with electrical, thermal, and mechanical hazards. Hobart incorporates advanced safety features, such as thermal cutoffs and secure gas line connections, to prevent accidents. Proper installation, as outlined in the manual, is critical to maintaining compliance with these standards. The dishwasher is also designed to handle specific water temperature and chloride levels, ensuring safe and efficient performance. By adhering to these safety standards, Hobart guarantees a durable and hazard-free appliance for commercial and industrial use. Regular inspections and maintenance, as recommended, further ensure ongoing compliance and safety.